T1070H7162514-X — The latched straight/straight version provides accessible card retention within a straight-exit route. Select this assembly together with the chassis bracket, clearance behind each connector and the card removal path.
Application and selection
Use the assembly to relocate a PCIe card from the motherboard slot to a defined chassis position. Check both end orientations, bracket holes, the cable path and removal access before specifying the host, card and target link configuration. Connect graphics-card auxiliary power separately as required by the card.
Interface and installation requirements
The catalogue generation identifies the product series, rather than establishing validated performance for every length and system combination. Agree on the sample, host platform and validation conditions for the intended link. Interpret orientation codes using this assembly’s drawing rather than a universal direction convention.
Drawing-based factory assessment
For an RFQ, supply the motherboard and card models, mating-face photographs, required length, bracket drawing and quantity. Suntecc can assess length, cable exits and production requirements against those inputs. Recheck mechanical clearance and link conditions when changing the route or end orientation.
During sample assembly, review mating, fastening, routing and removal in sequence, then record the selected configuration as a drawing revision for repeat orders. Measure length along the actual route and include connector access, rather than ordering solely from the straight-line distance between the two mating points. Record the connector orientation at each end so repeat orders use the same installation reference.
Discuss this cable assembly · Browse this product category