This three-end assembly combines a conventional motherboard 20-pin male interface with Type-E A-Key and USB 2.0 2×5-pin connections. Identifying each endpoint separately is essential when evaluating an internal wiring arrangement with different connector families.
Application and interface selection
Provide the motherboard port definition and the front-panel cable pin map. Confirm the destination and signal allocation of each branch, including the key position and pin numbering at the 2×5-pin housing. Housing position count alone does not define the wiring.
Installation and construction review
Specify both branch lengths independently and allow access around each connector. A physical branch does not add controller capability or establish arbitrary simultaneous-device support. Review the intended combination of connections against the actual host and cable mapping.
Drawing-based customization and RFQ
Suntecc evaluates drawing-based changes to length, cable exit, wiring and batch requirements. Include mating-interface details, a pin table, installation space and quantity in the RFQ. Define the configuration in an agreed drawing before proceeding with a custom requirement.
Evaluate a proposed assembly with the target equipment and planned length. Review mechanical fit, connection mapping and required functions together. Include any performance or environmental acceptance conditions in the request so the configuration can be assessed against the intended use.
Discuss this cable assembly · Browse this product category
